Experience:

26 Years in Mechanical Engineering Projects

Special Skills and Activities:

• Modern Workshop and expertise of conventional machining process.
• CNC Programming and Machining (Turning & Milling)
• Demonstration on software for Autodesk Inventor.
• CNC Autodesk Fusion 360, for CAM
• 3D Printer with Craftware
• Arduino software.
• Computer work in M S office and software.
• Fabrication work as per UG student for their TA 202 Projects work.
• Demonstration for Conventional Machine of modern workshop on machines
• Maintenances work, related to Machines and equipments.

Technical and academic contribution in the following main projects:

Five project in each semester for TA 202 course.

Experience:

• I have a experience of operating the Unidirectional prepreg machine.
• Maintain stock update using Bar code System
• I prepare samples for different kinds of testing such as Tensile, Compressive and Interlaminar fracture toughness.
• I have experience of procuring materials local market and outside markets.
• I make dies through rapid Tooling using a low melting point alloy.
• Fabricated various Strain –Gauge based instrumentation set-up for experimental stress analysis related researches in the laboratory.
• Technical assistance to the UG. PG. Students for designing, drawing, machining and arrangement of the experimental setup.
• Strain measurement and design analysis of Bauxite rotary car dumper structure.
• Conducting the experiments related to the under-graduate course ME-371

Special Skills and Activities:

• Fabricated different kinds of composite (Glass, Carbon, Kevlar) specimen through various techniques such as hand lay-up ,vacuum bagging ect..
• Fabricated different experimental setup for M.Tech and Research Scholars.
• Good knowledge of fabrication skill which is required for executing new set-ups for Research/M. Tech/PhD experimental work.
• Maintain accounts of sponsored project and A/C-1.
• Installation of strain gauge on different surfaces and acquiring signal data.
• Project employee appointment related work.

Technical and academic contribution in the following main projects:

• FESEM
• Bhabha Atomic Research Center (BARC)
• Aeronautics Research and Development Board (AR&DB)
• Department of Science and Technology (DST)
• MHDR Projects

Experience:

• From Jan 01, 2020 working as Technical Superintendent in Manufacturing Science Lab., Department of Mechanical Engineering, I.I.T. Kanpur.
• From Oct 16, 2013 to Dec 31, 2019 working as Junior Technical Superintendent in Manufacturing Science Lab., Department of Mechanical Engineering, I.I.T. Kanpur.
• From Apr 03, 2006 to Oct 15, 2013 worked as Junior Technician in Department of Civil Engineering, I.I.T. Kanpur.
• From Mar 07, 2002 to Apr 02, 2006 worked as Senior Project Mechanic in various projects of Manufacturing Science Lab., Department of Mechanical Engineering, I.I.T. Kanpur.

Special Skills:

• Hands on experience on Computerized Numerical Control Programming and Operations on CNC Lathe and Milling machines.
• Coordinate Measuring Machine (CMM) and 3D printing processes.
• Advanced Machining Processes like Electric Discharge Machining, EDM-Wirecut and Die sinking
• Working on Conventional machines like- Lathe, Milling, Drilling and Surface Grinding etc.
• Periodic maintenances work, related to Instruments, Machines and Equipments.

Activities:

• Conducting undergraduates laboratory classes of ME361A.
• Fabrication of experimental setups/parts for our undergraduate and postgraduate students for their experimentation.
• Providing technical assistance to the UG & PG students in their experimental setups and design.
• Perform experimentation and fabrication, for the students from other institutions like IIITs, NITs etc regarding their research work.

Experience:

More than 20 years of technical experience in industrial and academic area

Special Skills and Activities:

• Expertise in leak proof welding, soldering and brazing to make leak proof connections of gas liquid and refrigerant lines of different materials- Ferrous and non ferrous materials, Alloy Steels etc.
• Repair and maintenance of R & AC systems and heat exchangers.
• Technical support to UG students for B-Tech Projects, data collection and analysis.
• Design, development, fabrication of experiments test set ups as per the requirement of Research/M. Tech/PhD sponsored research projects and departmental research work in the field of thermal science.
• 'Industrial tour' for students and staff of department and coordinated tours to local and other industries.
• Search and procurement of instruments, machines, consumables etc.
• Management of stock ledgers, audits.
• Implementation of renovating ideas.
• Writing articles on social and technical subjects.
• Expertise in Hindi-English-Hindi translation and editing and typing

Technical and academic contribution in the following main projects:

1. Contributed in consultancy work for the installation of central Air-conditioning unit (500TR) at Dainik Jagran, Kanpur, with Professor Manohar Prasad, 2002.
2. Worked with Professor Manohar Prasad for development and design of air-conditioning for computer science building at Indian Institute of Technology Kanpur with Professor Manohar Prasad, 2002.
3. Fabricated ICE BANK TANK for R & AC systems with Ammonia for energy efficiency with Prof. Manohar Prasad and Prof. Keshav Kant, during December 2001 to June, 2006.
4. Development of hybrid solar cookers with Prof. Manohar Prasad and Prof. Keshav Kant in RAC laboratory for PhD student thesis work, 2002-2006.
5. Development of R & AC test rig to measure the super cooling and heating with Prof. Manohar Prasad, Prof. M. S. Kalra and Prof. Keshav Kant in RAC laboratory for PhD thesis work, to study pressure drop in capillary tubes of HVAC effects with various refrigerants, R-12, R-22, R-314a and mixtures of refrigerants 2003-2008.
6. Design and fabrication of low temperature cascade system of -45oC in RAC laboratory as M-Tech project, 2006.
7. Inspection of modern operation theatre (air-conditioning part) in Ursula Hospital Kanpur, 2008.
8. Developed advanced air-conditioning and refrigeration experimental tutors and for the testing and experimental work for UG and PG students.
9. Contributed in the advancement of Heat transfer laboratory with Dr. S. Khandekar and renovated experimental set-up of Forced convection, Natural convection, emissivity measurement, study of two phase flow.
10. Testing and calibration of pressure gauge, thermometer, thermocouples, solar systems, air conditioning and refrigeration systems.
11. Major contribution in the renovation work of RAC laboratory and conversion into Phase Change Thermal System Laboratory.

Publications and Presentations:

1. Research paper entitled “Solar Based Cooking: Lack of Popularity in Indian kitchens - A Study Based on Kanpur City” presented during International Congress on Renewable Energy-2009 (ICORE 2009) at New Delhi.
2. Research paper entitled “Popularizing Solar Cooking During Globalization in Indian Rural Areas” presented during the International Conference on Environmental Education (ICEED) at Dayalbagh Education Institute Deemed University Agra, 2010.
3. Contributed in development/editing of text book Refrigeration and Air-conditioning, second edition, by Prasad, Manohar, New Age Publication, New Delhi, 2003.
4. Contributed in development/editing of data book on Refrigeration and Air-conditioning, by Prasad, Manohar, New Age Publication, New Delhi, 2004.
5. Contributed in development/editing of text book on An Introduction to Energy Conversion Volume I and II, second edition, by Prasad, Manohar and V. Kadambi, New Age Publication, New Delhi, (this book remained un-published)
6. Contributed in the unit conversion (metric to SI unit for Indian market adaptation) of the book, Engineering Thermodynamics by Lynn D. Russell and George. A. Adebiyi (adapted by Dr. Sameer Khandekar)
7. Published Hindi article in the magazine of IIT Kanpur ‘Antas’ the title- Introduction to Refrigeration and Air-conditioning. http://www.iitk.ac.in/new/data/Antas/antas2015-7.pdf

Experience:

Worked as Project Associate at Powder Metallurgy Laboratory, Department of Materials Science and Engineering, I.I.T. Kanpur (Feb2007-Aug2007)

Special Skills and Activities:

• Operations of 3D Laser Doppler Vibrometer
• A hands-on knowledge on data acquisition system, automation and control systems.
• Work in the area of fabrication, customisation, testing, troubleshooting, repairing and installation of mechanical, electro-mechanical and electronic measuring and testing equipment.

Activities:

Maintenance of the experimental setups required for conducting undergraduate laboratory classes, assist doctoral and research scholars in building experimental setups, maintain laboratory computers (hardware and software), procurement and maintenance of the records of equipment and consumables of the laboratories.

Technical and academic contribution in the following main projects:

• The Indo-U.S. Science and Technology Forum (IUSSTF)
• UK-India Education and Research Initiative (UKIERI)
• Science and Engineering Research Board (SERB)
• Department of Science and Technology (DST)
• MHRD Projects
• Space Technology Cell (STC)
• Gas Authority of India Ltd (GAIL)
• Hindustan Aeronautics Ltd. (HAL)
• Uchhatar Avishkar Yojana (UAY)

N/A

Experience:

• Worked with LML Ltd. As Tool Room Supervisor in Injection Moulding section for five years.
• Worked in Department of Mechanical Engineering as a Project Technician in Energy Conversion Laboratory for last 5 years.
• Worked in Department of Chemistry as a Mechanic in workshop for Instruments Equipments Maintenance/Repairing.

Special Skills:

• Installed two numbers IC Engine Test-bed with all measuring instruments and used different window based computer interface software for same.
• Knowledge of Emission Measurement System, gas emission analyzers (up to 5 gases) and application of Catalytic Converters in IC engines.
• Good knowledge of fabrication skill which is required for executing new set-ups for Research/M. Tech/P.hD experimental work.

Activities:

• In-charge of experiments of UG Fluid Mechanics Laboratory (ME-231)
• In-charge of experiments of PG course on Experimental Techniques (ME-649)
• In-charge of general maintenance & procurements of UG & PG Laboratories
• Regular assistance to 2-3 BTP groups every year
• Regular assistance in design and fabrication of experimental set-ups of M. Tech & Ph. D students.

Experience:

24 Years in Mechanical Engineering Projects.

Special Skills and Activities:

• Modern Workshop and expertise of conventional machining process.
• CNC Programming and Machining (Turning & Milling)
• Demonstration on software for Autodesk Inventor.
• CNC Autodesk Fusion 360, for CAM
• 3D Printer with Craftware
• Arduino software.
• Computer work in M S office and software.
• Fabrication work as per UG student for their TA 202 Projects work.
• Demonstration for Conventional Machine of modern workshop on machines
• Maintenances work, related to Machines and equipments.

Technical and academic contribution in the following main projects:

Five project in each semester for TA 202 course.

Experience:

• Worked with Prestair Systems Pvt. Ltd as a Trainee from July 2009 to Dec 2009.
• Worked with KSW Scientific Pvt. Ltd as Production Engineer Dec 2009 Dec 2009.

Special Skills:

• Completed Vibration & Dynamics Lab Class for UG students from 2010 with measurment and instruments for theses experiments.
• Working jointly to conducting Vibration Lab and research along with Dr. Nalinaksh.S.Vyas, Late Dr. H. Hatwal, Dr. Bishakh Bhattacharya , Dr. S.S.Gupta and Dr. Panka Wahi from the Academic year 2009 to till date.
• Conducted a short term course for NVH Workshop with Prof. Bishakh Bhattacharya for Department of Mechanical Engineering Indian Institute of Technology Kanpur in 2011-12.
• Conducted a modular course for entire semester for Design programme students of Indian Institute of Technology Kanpur 2013-14 with Prof. Bishakh Bhattacharya.
• Deisned a Vortex Induced Vibration Demonstration setup for UG Student with Late Prof. H. Hatwal and now trying to built a computer interface software for same in next level.
• Applied Joint Patent with Prof. Bishakh Bhattacharya for Adaptive Vibration Energy Harvesting Device (VEHD). This is also a part of my joint research work for MDES programme at Design Programme, Indian Institute of Technology Kanpur .
• Successfully completed a Joint Research work on Design development and testing of a Energy Harvesting Device using Vibration at Graduate School of Information Production Systems ,WASEDA University Japan under the Guidance of Prof. Harutoshi Ogai and Prof. Bishakh Bhattacharya in the year 2014 and subsequent work is to be continued further.
• Submitted modified Adaptive Vibration Energy Harvesting Device (AVEHD) with all modification completed for joint patent in the year 2015.
• Knowledge of fabrication skill Data acquisition with virtual instrumentation which is required for executing new set-ups for Research/M. Tech/P.hD experimental work.
• Conducted a short term modular course in Vibration lab for Engineering Mechanics Workshop for IIT Kanpur with Prof. S.S.Gupta in the year of 2015.

Activities:

• Founder Member of RuTAG Indian Institute of Technology Kanpur.
• Part Time student of Design Programme Indian Institute of Technology Kanpur.
• Student member of SMSS Lab Indian Institute of Technology Kanpur.
• Research Alumuni and active member of Ogai Lab Graduate School of IPS Waseda Japan.

Experience:

• From May 2003 to till now working in Manufacturing Science Lab, Mechanical Engg., IIT Kanpur.
• Worked with Rico Auto Industries Ltd Gurgaon. As Engineer (Production CNC) from March 2000 to March 2002.
• Worked with Track Parts of India Ltd, Govind Nagar Kanpur. As Assistant Engineer (Production) from January 1994 to March 2000.

Special Skills:

• Good knowledge of open loop & close loop CNC programming and operating
• Good knowledge of Additive Manufacturing (3D Printing Metallic and polymer)
• A good experience in engineering drawing (CAD, CAM, Solidworks etc.)
• Good knowledge of various CNC Turning centres & CNC Machining centres programming with various controls (Fanuc, Siemens & Hinumeric).
• Good Knowledge of various Metrological Instruments such as Co-ordinate measuring machine, Roughness measuring machine, Atomic force measurement machine, Roundness Measuring Machine, Anton Paar Rheological Measuring Machine & various microscope.
• Good knowledge of non-traditional machining process such as EDM, ECM, AFM, MAF, MRAFF, AJM & LASER Machining etc.
• Good knowledge of conventional machining process such as Lathe, Milling, Grinding & Micromachining 3D printing (Rapid prototyping) etc.
• Good knowledge of corrective and Preventive Maintenance of Conventional & non- conventional machines.

Activities:

• Design and Fabrication of experimental setups for post graduate and research students.
• Conducting ME361A Lab classes for under graduate students.
• Determine & Demonstrate on various conventional, non-conventional, advance machining and measuring Instrumental machines to under graduate, post graduate and research students.
• Corrective and Preventive Maintenance of conventional & non-conventional machines and Measuring Instrumental machines etc.

N/A

Experience:

• From April 21 ,2015 Working as Junior Technical Superintendent in TA 202 LAB, Department of Mechanical Engineering. I.I.T Kanpur.
• From Jan 2012 to April 15,2015 worked as Lab Asst. in Mechanical Engg. Dept. in CIPET Bhubaneswar.
• From Nov 2011 to Dec 2012 worked as Machinists in Mechanical Engg. Dept in Krupajal Engineering School, Bhubaneswar.
• From July 21,2009 to Sept 11, 2011 Work as Technical Assistant in Mechanical Engg. Dept in Ganesh institute of Engineering & Technology Polytechnic Wing at Bhubaneswar.
• From July 10 ,2007 to August 10 ,2009 Worked as Training Officer in Bhubaneswar Industrial Training Center & Technology, at Bhubaneswar.
• From August 2004 to April 2007 Worked as Design Engineer cum Tool room Supervisor, at Mikron Tools Industries (P) LTD. IMT Gurgaon Haryana.
• From August 2003 to July 2004 worked as Tool Room Engineer cum Supervisor at Karna industries Limited, Delhi.

Special Skills and Activities:

• Hands on Experience in Modern Machines and Expertise in conventional machining process.
• CNC Programming and Machining (Turning & Milling).
• Demonstration of Software on Autodesk Inventor, AutoCAD, Catia, Autodesk Fusion 360 CAM.
• Arduino Software with Programming.
• 3D Printer with slicing Software.
• Computer work in MS Office and Software
• Preventive Maintenance Work, Related to Lab instruments, Machine and Equipment’s.

Technical and academic contribution in the following main projects:

Demonstration of Different Machines & Discussion on UG students projects, Drawing & Suggestion, Fabrication of 10 projects in Academic Year.

N/A

Experience:

6 Year Experience in Planning, Designing and Fabrication

Special Skills and Activities:

• Modern workshop and expertise of conventional machining process
• CNC Programming and Machining (Lathe & Milling)
• Demonstration of software like Autodesk Inventor, Autodesk Fusion 360 for CAM
• 3D Printer with Slicing Software
• Basic knowledge of Arduino and programming
• Computer proficiency on MS Word, PowerPoint and Excel sheet

Technical and academic contribution in the following main projects:

• Demonstration of different machines & discussion on UG student Projects, drawing and suggestions, Fabrication of 10 Projects in each academic year
• Preventive Maintenances work, related to Lab. Instruments, Machines and Equipment

N/A

Experience:

• 5-years (2010-15) experience in Automotive Industry
• 5-years (2015-Till Date) In TA 202 LAB ME IIT Kanpur

Special Skills and Activities:

• Raw material testing, Jominy test, Grain flow, UTM and Micro Testing
• Convergent with Forging and Machining Process

Technical and academic contribution in the following main projects:

• Handling project related activity in every semester
• Responsible for Mechanical Maintenance related work

Experience:

Heat Transfer Laboratory

Technical and academic contribution in the following main projects:

• Heat Transfer
• Conventional & Non- conventional machining, CNCs Machines
• Measurement & Metrology
• Advanced Manufacturing Processes
• Solid Mechanics

N/A

Experience:

• From April 23 ,2019 Working as Junior Technician in TA 202 LAB, Department of Mechanical Engineering. I.I.T Kanpur
• From April 01,2013 to January 31,2017 worked as Tool Room Engineer in 3D Billets Elektro Werke Pvt.ltd. Umbergaon Gujarat

Special Skills and Activities:

• Hands on Experience in Modern Machines and Expertise in conventional machining process
• CNC Programming and Machining (Turning & Milling)
• Demonstration of Software on Autodesk Inventor, AutoCAD, Autodesk Fusion 360 CAM
• Arduino Software with Programming
• 3D Printer with slicing Software
• Computer work in MS Office and Software

Technical and academic contribution in the following main projects:

• Demonstration of Different Machines & Discussion on UG students projects, Drawing & Suggestion, Fabrication of 10 projects in Academic Year
• Maintenance Work, Related to Lab instruments, Machine and Equipment’s