Tel. +91 512 2597136
Email: rfidlabs@iitk.ac.in
Department of Electrical Engineering Indian Institute of Technology Kanpur Kanpur - 208 016, India
We have all the resources to perform operation for RFID. We have Anecohic Chamber, Readers, Tags, Antenna, Vector Network Analyzer. We have readers those are performing at high frequency(850 MHZ - 950 MHZ).

Anechoic Chamber

Transmitting Antennas:  A wide variety of antennas which include dipoles, horn, helix, long-periodic etc.
Quiet-Zone Volume:  5.0 m x 3.0 m x 0.9 m
Frequency Range:  900 MHz to 26.0 GHz
Chamber Size:   7.0 m x 6.0 m x 3.3 m
Shielding Effectiveness:   Min. 50 dB at 1.0 GHz and min. 40 dB from 2.0 to 18.0 GHz.


The ALR-8800 was built for optimal Gen 2 performance in the European regulatory environment. It is fully compliant to the European Telecommunications Standards Institute (ETSI) EN 302-208 specification. The ALR-8800 enables Alien European value-added solutions providers to deliver high-performance EPC Gen 2 RFID solutions across the European Union. The widely-supported Alien Reader Protocol allows systems integrators and software vendors to quickly and cost-effectively address fast-emerging European RFID opportunities. The reader is compliant with ISO-18000-6c and EPC Gen 2 protocols and has been tested for interoperability with leading Gen 2 RFID tags.

Operating in the 866 MHz band defined by the ETSI EN 302-208 specification, the ALR-8800 is available for use in the EU, New Zealand and India.


G E N 2 SQ U I G G LE ®
• World Tag: global operation 860 to 960 MHz
• The EPC Class 1 Gen 2 price/performance benchmark
• High performance solution for most packaging including products
containing metal and water
• 97mm x 11mm

G E N 2 O M N I - SQ U I G G LE ®
• World Tag: global operation 860 to 960 MHz
• High performance, omni-directional design
• Form factor supports 3x3 inch labels
• 75mm x 75mm


Frequency Range: 865 - 965 MHz
Polarization: circular
Gain: 5.5dBiL max
Beam Width: Less than 70º
Input Impedance: 50 Ohm nominal
Cable: 6 Metres LMR-195, 50 ohm coaxial, reverse polarity connector
Dimensions: 25cm x 25cm x 3.8cm
Return Loss: Less than -15 dB across frequency range
Operating Temperature: Oº TO 50º C
Reader Compatability: ETSI certified for use with the ALR-8780 RFID Reader

Vector Network Analyzer

Frequency Range: 10 MHz - 50GHz
Dynamic Range: 108 dB
Trace Noise: <  0.006 dB
Measurement Points: 16,001
Calibration: OSL, TRL, waveguide etc.
Copyright © 2011-2012