2009  
1 | P. Maji, B. Basu and R. K. Dube Enhancement of wear resistance of copper with tungsten addition (< 20 wt. %) by powder metallurgy route Journal of Tribology, 2009, vol. 131[4], p. 041602-1:041602-9., |
2 | G. Brahma Raju and Bikramjit Basu Influence of MoSi2 addition on load-dependent fretting wear properties of TiB2 against Cemented Carbide J. Am. Cer. Soc., 2009, vol. 92 [9], p. 2059, |
3 | Ravi Kumar, N. Ackibas, F. Kara, H. Mandal and B. Basu Microstructure-mechanical property-wear resistance relationship for Sialon ceramics Metallurgical and Materials Transactions A, 2009, vol. 40 [10] , p. 2319, |
4 | Shekhar Nath, Bikramjit Basu, Mira Mohanty and P. V. Mohanan In vivo response of novel Hydroxyapatite-mullite composites: Results up to 12 weeks of implantation Journal of Biomedical Materials Research: Part B, 2009, vol. 90B, p. 547, |
5 | G. Brahma Raju, K. Biswas and Bikramjit Basu Microstructural Characterization and Isothermal Oxidation Behavior of Hot-Pressed TiB2-10 wt% TiSi2 Composite Scripta Materialia, 2009, vol. 61, p. 674, |
6 | Ravi Kumar, Sushma Kalmodia, Shekhar Nath, Dileep Singh and Bikramjit Basu Phase assemblage study and cytocompatibility property of heat treated potassium magnesium phosphate–silicate ceramics Journal of Materials Science: Materials in Medicine, 2009, vol. 20 [8], p. 1689, |
7 | P. Munda, B. Basu, R K Dube and S C Koria Understanding of Friction and Wear properties of Steel Backed Al-10Sn-4Si-1Cu metallic Strips prepared via Spray Atomization-Deposition-Rolling Route Surface and Coatings Technology, 2009, vol. 203, p. 3541, |
8 | A. R. Molla, B. V. Manoj Kumar and B. Basu Fretting wear behavior SiO2-MgO-Al2O3- K2O-B2O3-F glass ceramics in ambient conditions and artificial saliva J. Eur. Cer. Soc., 2009, vol. 29, p. 2481, |
9 | B. Basu, B. V. Manoj Kumar and P. Gilman Sliding wear properties of high purity copper in cryogenic environment Journal of Materials Science, 2009, vol. 44, p. 2300, |
10 | A. Dubey, A. Tiwari, R. Kumar, S. Gupta and B. Basu Time constant determination for electrical equivalent of biological cells Journal of Applied Physics, 2009, vol. 105 [8], p. 084705 - 084705-8, |
11 | Subhadip Bodhak, Shekhar Nath and Bikramjit Basu Friction and Wear Properties of Novel HDPE-HAp-Al2O3 Composites against Alumina counterface J. Biomaterials Applications, 2009, vol. 23, p. 407, |
12 | Shekhar Nath, Subhadip Bodhak and Bikramjit Basu HDPE-Al2O3-HAp Composites for Biomedical Applications: Processing and Characterization Journal of Biomedical Materials Research: Part B, Applied Biomaterials, 2009, vol. 88B, p. 1, |
13 | Devesh Tiwari, Bikramjit Basu and Koushik Biswas Simulation of Thermal and Electric field Evolution during Spark Plasma Sintering Ceramics International, 2009, vol. 35, p. 699, |
14 | Shekhar Nath, Rajesh Tripathi and Bikramjit Basu Understanding Phase stability, microstructure development and biocompatibility in Calcium Phosphate-Titania composites, synthesized from Hydroxyapatite and Titanium Powder mix Mat. Sc. Engg. C., 2009, vol. 29, p. 97, |
15 | Bikramjit Basu, Manisha and N. K. Mukhopadhyay Understanding the mechanical properties of hot pressed Ba-doped S-Phase sialon Ceramics J. Eur. Cer. Soc., 2009, vol. 29, p. 801, |
16 | A. Mukhopadhyay, G. B. Raju, A. K. Suri and B. Basu Correlation between phase evolution, mechanical properties and instrumented indentation response of TiB2-based ceramics J. Eur. Cer. Soc., 2009, vol. 29, p. 505, |
17 | Bikramjit Basu, Devesh Tiwari, Debasis Kundu and Rajesh Prasad Is Weibull Distribution the Most Appropriate Statistical Strength Distribution for Brittle Materials? Ceramics International, 2009, vol. 35, p. 237, |
18 | B. Basu, J. Sarkar and R. Mishra Understanding friction and wear mechanisms of high-purity Titanium against steel in liquid nitrogen temperature Metallurgical and Materials Transactions, 2009, vol. 40A, p. 472, |
19 | A. Tewari, R. K. Bordia and B. Basu Model for Fretting Wear of Brittle Ceramics Acta Materialia, 2009, vol. 57, p. 2080, |
20 | A. R. Molla and B. Basu Microstructure, mechanical and in vitro properties of Mica Glass-ceramics with varying fluorine content Journal of Materials Science: Materials in Medicine, 2009, vol. 20 [4], p. 869, |
21 | G. Brahma Raju, Bikramjit Basu, N. H. Tak and S. J. Cho Temperature dependent Hardness and Strength Properties of TiB2 with TiSi2 sinter-aid J. Eur. Cer. Soc., 2009, vol. 29 [10], p. 2119, |
22 | Kantesh Balani, R. G. Batista, D. Lahiri, A. Agarwal Hydrophobicity of Lotus Leaf: A Nanomechanical and Computational Approach Nanotechnology, 2009, vol. 20, p. 305707, |
23 | Kantesh Balani, F.C. Brito, L. Kos and A. Agarwal Stiffness Dependence of Pigmentation in Murine Cardiac Tricuspid Valve Leaflet, J Royal Society Interface, 2009, vol. 6, p. 1097, |
24 | Kantesh Balani, A.K. Keshri, D. Lahiri, J.E. Tercero and A. Agarwal Nano-scratching of Biocompatible Hydroxyapatite Reinforced with Aluminum Oxide and Carbon Nanotubes J. Metals, Minerals and Materials (JOM), 2009, vol. 61 (9), p. 63, |
25 | J. Tercero, S. Namin, D. Lahiri, Kantesh Balani, N. Tsoukias and A. Agarwal Effect of Carbon Nanotube and Aluminum Oxide Addition on Plasma Sprayed Hyrdoxyapatite Coating’s Mechanical Properties and Biocompatibility Materials Science and Engineering, 2009, vol. 29, p. 2195, |
26 | M.K. Samal, Kantesh Balani, M. Seidenfuss, E. Roos Experimental and numerical investigation of fracture resistance behaviour of a dissimilar metal welded joint Proc. IMechE, Part C: Journal of Mechanical Engineering Science, 2009, vol. 223, p. 1507, |
27 | S.K. Vajpai and R.K. Dube Preparation of nanocrystalline Ni-Fe strip via mechanical alloying compaction- sintering - hot rolling route Journal of Materials Science, 2009, vol. 44, p. 129, |
28 | S.K. Vajpai, B.V. Mahesh and R.K. Dube Studies on the bulk nanocrystalline Ni-Fe-Co alloy prepared by mechanical alloying-sintering- hot rolling route Journal of Alloys and Compounds, 2009, vol. 476, p. 311, |
29 | K.K. Sahu, R.K. Dube and S.C. Koria Aspects of porosity formation in spray deposited thin aluminium strip Powder Metallurgy, 2009, vol. 52 (2), p. 135, |
30 | P. Munda, R.K. Dube, B. Basu and S.C. Koria Friction and wear properties of steel backed Al-10Sn-4Si-1Cu metallic strips prepared via spray atomization-deposition-rolling route Surface and Coating Technology, 2009, vol. 203, p. 3541, |
31 | S.K. Vajpai, R.K. Dube, and M. Sharma Studies on the mechanism of the structural evolution in Cu-Al-Ni elemental powder mixture during high energy ball milling J. Materials Science, 2009, vol. 44, p. 4334, |
32 | Poulami Maji, R.K.Dube, and Bikramjit Basu Enhancement of wear resistance of copper with tungsten addition ( < 20 wt%) by powder metallurgy route Journal of Tribology, 2009, vol. 131 (4), p. 041602 (1-9), |
33 | R.K. Dube On the Kautilya’s characterization tests for the purity of silver and its experimental replication Materials Characterization, 2009, vol. 60, p. 277, |
34 | R.K. Dube On the Sanskrit word Svarnaja used for metal tin Indian Journal of the History of Science, 2009, vol. 44, p. 95, |
35 | S. Kitamura, S. Saito, K. Utagawa, H. Shibata and D. G. C. Robertson Mass Transfer of P2O5 between Liquid Slag and Solid Solution of 2CaO-SiO2 and 3CaO-P2O5 ISIJ International, 2009, vol. 49, p. 1838, |
36 | K. Mondal, A. Kumar, G. Gupta and B.S. Murty Temperature and structure dependency of solid-liquid interfacial energy Acta Mater, 2009, vol. 57, p. 3422, |
37 | G. Gupta, K. Mondal and R. Balasubramaniam In situ nanocrystalline Fe–Si coating by mechanical alloying J.Alloys and Compounds, 2009, vol. 482, p. 118, |
38 | A.K.Pradhan, S.P.Gupta and K.Mondal Effect of Zn concentration on diffusion induced grain boundary migration in Cu-Zn system Trans. IIM, 2009, vol. 62, p. 233, |
39 | K.Mondal and K.Hono On the constrained and unconstrained room temperature plasticity of metallic glass Trans IIM, 2009, vol. 62 (4-5), p. 441, |
40 | S. Ingole, P. Manandhar, J. A. Wright, E. Nazaretski, J. D. Thompson and S. T. Picraux “Assembly and Magnetic Properties of Nickel Nanoparticles on Silicon Nanowires” Appl. Phys. Lett., 2009, vol. 94, p. 223118, |
41 | G.K. Mandal, R. Balasubramaniam and S.P. Mehrotra Theoretical investigation of the interfacial reactions during hot dip galvanizing of steel Materials and Metallurgical Transaction A, 2009, vol. 40A, p. 637, |
42 | G.K. Mandal, D. Mandal, S.K. Das, R. Balasubramaniam and S.P. Mehrotra Microstructural study of galvanized coatings formed in pure as well as commercial grade Zn baths `, 2009, vol. 62, p. 35, |
43 | C. Sasikumar, S. Srikanth, N.K. Mukhopadhyay and S.P. Mehrotra Energetics of mechanical activation – Application to ilmenite Minerals Engineering, 2009, vol. 22, p. 572, |
44 | A. Das, A. Vidyadhar and S. P. Mehrotra A novel flowsheet combining dry and wet techniques for the recovery of metal values from waste printed circuit boards Resources, Conservation and Recycling, 2009, vol. 53, p. 464, |
45 | Chandan Guria, Mohan Varma, Santosh K. Gupta and S.P.Mehrotra Optimal synthesis of an industrial fluorspar beneficiation plant using a jumping gene adaptation of genetic algorithm Minerals and Metallurgical Processing Journal, 2009, vol. , p. 174, |
46 | R. Kanti, M. Kumar, S. Ranganthan, S. Saksena and S.P. Mehrotra Resistance heating of oxide slags Theoretical model and experimental validation, Canadian Metallurgical Quarterly, 2009, vol. 48, p. 387, |
47 | A. Das, B. Sarkar and S. P. Mehrotra Prediction of separation performanceof flotex density separation for processing of fine coal particles International Journal of Mineral Processing, 2009, vol. 91, p. 41, |
48 | A. Roy, S. J. Parihar A. Singh, R. C Sharma and R. Shekhar” Quench hardening of 0.4 % C steel by using aqueous electrolyte plasma as heat source Surface Engineering, 2009, vol. 25 (6), p. 423, |
49 | R Balasubramaniam New Insights on Architects of Taj Indian Journal of History of Science, 2009, vol. 44.3, p. 389-410, |
50 | R Balasubramaniam New Insights on Artisans of Taj Indian Journal of History of Science, 2009, vol. 44.4, p. 521-550, |
51 | M.R. Barnett, A. Sullivan and R Balasubramaniam Electron Backscattering Diffraction Analysis of an Ancient Wootz Steel Blade from Central India Materials Characterization, 2009, vol. 60, p. 252-260, |
52 | R. Balasubramaniam On History of Damage Caused to Quwwat-ul-Islam Mosque by Cannon Fire Employed to Break the Delhi Iron Pillar IFCAI Journal of History and Culture, 2009, vol. 3, p. 105-116, |
53 | R. Balasubramaniam, V.N. Prabhakar and Manish Shankar On Technical Analysis of Cannon Shot Crater on Delhi Iron Pillar Indian Journal of History of Science, 2009, vol. 44, p. 29-46, |
54 | M. R. Barnett, R. Balasubramaniam, Vinod Kumar and Colin MacRae Correlation between Microstructure and Phosphorus Segregation in a Hypereutectoid Wootz Steel Journal of Materials Science, 2009, vol. 44, p. 2192-2197, |
55 | D. Wang, Ted B. Flanagan, Gauthama and R. Balasubramaniam H2 Solubility in Pd/Cr2O3 Composites Prepared by Internal Oxidation of Pd -Cr Alloys: Equilibrium Pressure-Composition-Temperature Data Journal of Physical Chemistry, 2009, vol. 113, p. 4078-4087, |
56 | R. Balasubramaniam On the Confirmation of the Traditional Unit of Length Measure in the Estimates of Circumference of the Earth Current Science, 2009, vol. 96, p. 547-552, |
57 | Deepika Sachdeva and R. Balasubramaniam Passivity of Tb0.3Dy0.7Fe1.92 in Alkaline Solution and Its Breakdown by Chloride Ions Corrosion Engineering Science and Technology, 2009, vol. 44, p. 280-288, |
58 | Bijayani Panda, R. Balasubramaniam, A. C. Vajpei, S. Srikanth and A. Bhattacharyya Characterization of Rust on Microalloyed Rail Steel Exposed to Coastal location in India Corrosion Engineering Science and Technology, 2009, vol. 44, p. 275-279, |
59 | M. Kukreja, R. Balasubramaniam, Q.B .Nguyen, and M. Gupta Enhancing Corrosion Resistance of Mg Alloy AZ31B in NaCl Solution Using Alumina Reinforcement at Nanolength Scale Corrosion Engineering Science and Technology, 2009, vol. 44, p. 381-383, |
60 | Bijayani Panda, R. Balasubramaniam and A.P. Moon Microstructure and Mechanical Properties of Novel Rail Steels Materials Science and Technology, 2009, vol. 25, p. 1375-1382, |
61 | A.P. Moon and R. Balasubramaniam Determination of Hydrogen Diffusivity in Rail Steels by Subscale Micro-hardness Profiling Technique Defects and Diffusion Forum, 2009, vol. 293, p. 41-45, |
62 | R. Balasubramaniam New Insights on Metrology during Maurayan Period Current Science, 2009, vol. 97, p. 680-682, |
63 | R.Balasubramaniam New Insights on the Modular Planning of the Taj Current Science, 2009, vol. 97, p. 42-49, |
64 | Bijayani Panda, R Balasubramaniam, Sujata Mohapatra,Gopal Dwivedi Fretting and Fretting Corrosion Behavior of Novel Microalloyed Rail Steels Wear, 2009, vol. 267, p. 1702-1708, |
65 | Girija Samal, N. Unni Narayanan, Saswat Bharat and Deepak Improved efficiency in fluorescent blue organic light emitting diode with a carrier confining structure Organic Electronics, 2009, vol. 10, p. 1201-1208, |
66 | Dipti Gupta, Monica Katiyar, Deepak An analysis of the difference in behavior of top and bottom contact organic thin film transistors using device simulations Organic Electronics, 2009, vol. 10 (5), p. 775-784, |
67 | P.Sharma, Krishanu Biswas and A.K.Mondal Size Effect on Lattice Parameter of KCl during Mechanical Milling Scripta Mater, 2009, vol. 61, p. 600-603, |
68 | G.B.Raju, Krishanu Biswas and B.Basu Microstructural Characterization and Isothermal Oxidation Behavior of Hot-Pressed TiB2-10 wt% TiSi2 Composite Scripta Mater, 2009, vol. 61(1), p. 104-107, |
69 | A. Mondal, D. Agrawal, A. Upadhyaya Microwave Heating of Pure Copper Powder with Varying Particle Size and Porosity Journal of Microwave Power & Electromagnetic Energy JMPEE, 2009, vol. 43(1), p. 5-10, |
70 | A. Mondal, A. Upadhyaya, D. Agrawal Microwave Sintering of W-18Cu and W-7Ni-3Cu Alloys Journal of Microwave Power & Electromagnetic Energy JMPEE, 2009, vol. 43(1), p. 11-16, |
71 | A. Upadhyaya and S. Balaji Sintered Intermetallic Reinforced 434L Ferritic Stainless Steel Composites Metallurgical and Materials Transactions A, 2009, vol. 40A, p. 673-683, |
72 | S.S. Panda, D.P. Mishra, A. Upadhyaya Effect of Varying Gas-Flow Conditions on the Characteristics of the Diffusion Flame and Silica Powders Prepared using Flame Combustion Synthesis Powder Technology, 2009, vol. 191, p. 164-169, |
73 | S. Balaji and A. Upadhyaya Mechanical, Corrosion and Sliding Wear Behavior of Aluminide Reinforced Austenitic Stainless Steel Composites Journal of Materials Science, 2009, vol. 44(9), p. 2310-2319, |
74 | B. Palanisamy, A. Upadhyaya and K. Anand Evaluation of Braze Bonded Hard Complex Boride Based Coatings for Sliding Erosion and Abrasion Wear Wear, 2009, vol. 266, p. 1058-1065, |
75 | D. Maurya, K.S. Nalwa. H. Thota and A. Garg BiFeO3 Ceramics Synthesized by Mechanical Activation Assisted vis-à-vis Conventional Solid-State-Reaction Process: A Comparative Study Journal of Alloys and Compounds, 2009, vol. 477, p. 780, |
76 | A. Srivastava, A. Garg and F.D. Morrison Impedance Spectroscopy Studies on Polycrystalline BiFeO3 Thin Films on Pt/Si Substrates Journal of Applied Physics, 2009, vol. 105, p. 54103, |
77 | S. Gupta, A. Garg, D.C. Agrawal, S. Bhattacharjee and D. Pandey Structural Changes and Ferroelectric Properties of BiFeO3-PbTiO3 Thin Films Grown via a Chemical Multilayer Deposition Method Journal of Applied Physics, 2009, vol. 105, p. 14101, |
78 | V.R. Singh, A. Garg, D.C. Agrawal Structure and properties of lanthanum-doped bismuth ferrite thin films Solid State Communications, 2009, vol. 149, p. 734, |
79 | A. Solanki, A. Gupta, S.S.K. Iyer and A. Garg Photovolatic Effect in Organic Solar Cell Device using AVPV Solar Energy Materials and Solar Cells, 2009, vol. 93, p. 211, |
80 | D. Maurya, H. Thota, A. Garg, B. Pandey, P. Chand, and H.C. Verma Magnetic Studies on Multiferroic Bi1-xSmxFeO3 Ceramics Synthesized by Mechanical Activation Assisted Process Journal of Physics C: Condensed Matter, 2009, vol. 21, p. 26007, |
81 | S. Bhargava, A. Garg and D. Subasinghe In-situ High-Temperature Phase Transformation Studies on Pyrite Fuel, 2009, vol. 88, p. 988, |
82 | S Ranganathan, Tripti Biswas and Anandh Subramaniam Discovering and Designing Bulk Metallic Glasses Properties and Applications of Complex Intermetallics (Ed. E. Belin-Ferre) New Jersy, World Scientific, 2009, vol. 1, p. 413, |