|
(1) Akhilendra Pratap Singh, Avinash Kumar
Agarwal, “Combustion Characteristics of Diesel HCCI Engine: An
Experimental Investigation Using External Mixture Formation Technique”,
Accepted for publication in Applied Energy, February 2012. (ISSN #
0306-2619).
(Link)
(2) Jithin Lukose, Akhilendra Pratap Singh,
Avinash Kumar Agarwal, Characterization of Exhaust Particulates from
Diesel Fuelled Homogenous Charge Compression Ignition Combustion
Engine”, Accepted for publication in Aerosol Science and Technology,
March 2012. (ISSN # 0278-6826)
(Link)
(3) Anirudh Gautam, Avinash Kumar Agarwal,
“Experimental Investigations of Comparative Performance, Emission and
Combustion Characteristics of Cottonseed Biodiesel Fuelled Four-Stroke
Locomotive Diesel Engine”, Accepted for publication in Journal of Engine
Research, Proceedings of IMechE, January 2012. (ISSN # 1468 0874).
(Link)
(4) Avinash Kumar Agarwal, Vipul H Chaudhury,
“Spray Characteristics of Biodiesel/ Blends in a High Pressure Constant
Volume Spray Chamber” Accepted for publication in Experimental Fluid and
Thermal Science, January 2010. (ISSN # 0894-1777)
(Link)
(5) Deepak Khurana, Avinash Kumar Agarwal,
“Long-Term Storage Oxidation Stability of Karanja Biodiesel with Use of
Antioxidants”, Accepted for publication in Fuel Processing Technology,
December 2011. (ISSN # 0378-3820)
(Link)
(6) Rakesh Kumar Maurya, Avinash Kumar Agarwal,
“Experimental Investigations of Gasoline HCCI Engine during Startup and
Transients”, SAE 2011-01-2445 SAE International Journal of Engines,
March 2012. (ISSN # 1946-3936).
(Link)
(7) Rakesh Kumar Maurya, Avinash Kumar Agarwal,
“Effect of Start of Injection on the Particulate Emitted by Methanol
Fuelled HCCI Engine”, SAE International Journal of Fuels and Lubricants,
Volume 4, Issue 2, December 2011, pp 204-222. (ISSN # 1946-3952).
(Link)
(8) Jitendra N. Gangwar, Tarun Gupta, Avinash
Kumar Agarwal, “Composition and Comparative Toxicity of Particulate
Matter Emitted from Diesel and Biodiesel Fueled CRDI Engine”,
Atmospheric Environment, Accepted for Publication 2011. (ISSN #
1352-2310).
(Link)
(9) Atul Dhar, Roblet Kevin, Avinash Kumar Agarwal,
“Production of Biodiesel from High-FFA Neem Oil and its Performance,
Emission and Combustion Characterization in a Decentralized Power
Generating CI Engine”, Journal of Automobile Engineering, Proceedings of
IMechE, Part-D, Accepted for Publication 2011. (ISSN # 09544070).
(Link)
(10) Rakesh Kumar Maurya, Dev Datt Pal, Avinash
Kumar Agarwal, “Digital Signal Processing of Cylinder Pressure Data for
Combustion Diagnostics of HCCI Engine” , Mechanical Systems Signal
Processing, Accepted for Publication 2011. (ISSN: 0888-3270).
(Link)
(11) Dhananjay Kumar Srivastava, Avinash Kumar
Agarwal, Tarun Gupta, “Effect of Engine Load on Size and Number
Distribution of Particulate Matter Emitted from a Direct Injection
Compression Ignition Engine” Aerosol and Air Quality Research, Accepted
for publication, 2011. (ISSN 1680-8584). (Link)
(12) Avinash Kumar Agarwal, Atul Dhar,
“Performance, Emissions and Combustion Characterization of Biodiesel in
a Generator Engine”, International Energy Journal, International
Energy Journal, Volume 12, Issue 1, March 2011. (ISSN # 1513-718X). (Link)
(13) Rakesh Kumar Maurya, Avinash Kumar Agarwal,
“Statistical Analysis of the Cyclic Variation of Heat Release Parameters
in HCCI Combustion of Methanol and Gasoline”, Applied Energy, Volume 89,
Issue 1, January 2012, pp. 228-236). (ISSN # 0306-2619).
(Link)
(14) Avinash Kumar Agarwal, Sandeep Kumar Goyal,
Dhananjay Kumar Srivastava, "Time Resolved Numerical Modeling of Oil Jet
Cooling of a Medium Duty Diesel Engine Piston", International
Communications in Heat and Mass Transfer, Volume 38, pp. 1080–1085,
October 2011. (ISSN # 0735-1933).
(Link)
(15) Rakesh Kumar Maurya, Dhananjay Kumar
Srivastava, Avinash Kumar Agarwal, “Experimental Investigations of
Particulate Emitted by an Alcohol Fuelled HCCI/ CAI Combustion Engine”,
International Energy Journal, Volume 12, Issue 1, March 2011. (ISSN #
1513-718X).(Link)
(16) Deepak Khurana, Avinash Kumar Agarwal,
“Oxidation Stability, Engine Performance and Emissions Investigations of
Karanja, Neem and Jatropha Biodiesel and Blends”, SAE 2011- 01-0617, SAE
Special Publication 2011 and SAE International Journal of Fuels and
Lubricants, pp 76-83, June 2011. (Print ISSN: 1946-3952; Online ISSN:
1946-3960).
(Link)
(17) Tarun Gupta, Neelabh Dixit, Avinash Kumar
Agarwal, “The Secondary Organic Carbon (SOC) Formation from a CRDI
Automotive Diesel Engine Exhaust”, SAE 2011-01-0642, SAE Special
Publication 2011. (DOI: 10.4271/2011-01-0642).
(Link)
(18) Rakesh Kumar Maurya, Avinash Kumar Agarwal,
“Experimental Investigation on Intake Air Temperature and Air-Fuel Ratio
Dependence of Random and Deterministic Cyclic Variability in a
Homogeneous Charge Compression Ignition Engine”, SAE 2011-01-1183,
SAE Special Publication 2011 (SP-2312). (ISBN: 978-0-7680-4751-6).
(Link)
(19) T.T. Kivevele, Avinash K. Agarwal, Tarun
Gupta, M.M. Mbarawa, “Oxidation Stability of Biodiesel Produced from
Non-Edible Oils of African Origin”, SAE 2011-01-1202, SAE Special
Publication 2011 (SAE COLL-TP-00160). (DOI: 10.4271/2011-01-1202).
(Link)
(20) Jitendra Gangwar, Tarun Gupta, Sudhir Gupta,
Avinash Kumar Agarwal, “Comparison of Emission from Diesel vs. Biodiesel
Fuel Used in CRDI SUV Engine: PM Mass and Chemical Composition
Investigation” Inhalation Toxicology, Vol. 23(8), pp 449-458,
2011.(ISSN: 0895-8378).
(Link)
(21) Dhananjay Kumar Srivastava, Kewal Dharamshi,
Avinash Kumar Agarwal, “Flame Kernel Characterization of Laser Ignition
of Natural Gas - Air Mixture in a Constant Volume Combustion Chamber”,
Optics and Lasers in Engineering, Vol. 49, pp 1201-1209, 2011. (ISSN #
0143-8166).
(Link)
(22) Deepak Agarwal, Shrawan Kumar Singh, Avinash Kumar
Agarwal, “Effect of Exhaust Gas Recirculation (EGR) on Performance,
Emissions, Deposits and Durability of a constant Speed Compression
Ignition Engine” Applied Energy, Vol. 88, pp 2900-2907, August
2011.(ISSN # 0306-2619).
(Link)
(23) Avinash Kumar Agarwal, Tarun Gupta, Abhishek
Kothari, “Particulate Emissions from Biodiesel Vs Diesel Fuelled
Compression Ignition Engine”, “Renewable and Sustainable Energy
Reviews”, Vol. 15, pp 3278-3300, 2011. (ISSN # 1364-0321).
(Link)
(24) Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Experimental Study of
Combustion and Emission Characteristics of Ethanol Fuelled Port Injected
Homogeneous Charge Compression Ignition (HCCI) Combustion Engine”,
Applied Energy, Vol. 88, 1169-1180, April 2011. (ISSN # 0306-2619).
(Link)
(25) Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Experimental
investigation on the effect of intake air temperature and air-fuel ratio
on cycle-to-cycle variations of HCCI combustion and performance
parameters” Applied Energy, Vol. 88, pp 1153-1163, April 2011. (ISSN #
0306-2619).
(Link)
(26) Avinash Kumar Agarwal, Tarun Gupta, Abhishek Kothari, “Toxic
Potential Evaluation of Particulate Matter Emitted from a Constant Speed
Compression Ignition Engine: A Comparison between Straight Vegetable Oil
and Mineral Diesel”, Aerosol Science and Technology, Volume 44, Issue 9,
pp 724-733, 2010 (ISSN # 0278-6826).
(Link)
(27) Tarun Gupta, Abhishek Kothari, Dhananjay Kumar Srivastava, Avinash
Kumar Agarwal, “Measurement of Number and Size Distribution of Particles
Emitted from a Mid-Sized Transportation Multipoint Port Fuel Injection
Gasoline Engine”, Fuel, Volume 89, Issue 9, pp 2230-33, September 2010.
(ISSN # 0016-2361).
(Link)
(28) Avinash Kumar Agarwal, Atul Dhar, “Comparative Performance, Emission
and Combustion Characteristics of Rice-bran Oil and It’s Biodiesel in a
Transportation Diesel Engine”, Journal of Engineering for Gas Turbine
and Power, Transactions of ASME, Volume 132, Issue 6, pp 064503-1-4,
June 2010. (ISSN # 0742-4795).
(Link)
(29) Avinash Kumar Agarwal, Atul Dhar, “Experimental Investigation of
Preheated Jatropha Oil Fuelled Direct Injection Compression Ignition
Engine: Part-I, Performance, Emission and Combustion Characteristics”
Journal of ASTM International, Volume 7, Issue 6, pp 1-13, June 2010.
(ISSN: 1546-962X).
(Link)
(30) Avinash Kumar Agarwal, Atul Dhar, “Experimental Investigation of
Preheated Jatropha Oil Fuelled Direct Injection Compression Ignition
Engine: Part-II, Engine Durability and Effect on Lubricating Oil”
Journal of ASTM International, Volume 7, Issue 2, pp 46-60, February
2010. (ISSN: 1546-962X).
(Link)
(31) Rajveer Singh Rathore, Dhananjay Kumar Srivastava, Avinash Kumar
Agarwal, Nishith Verma, “Development of Surface Functionalized Activated
Carbon Fiber for Control of NO and Particulate Matter”, Journal of
Hazardous Materials, Volume 173, Issues 1-3, pp 211-222, 2010, (ISSN #
0304-3894).
(Link)
(32) Avinash Kumar Agarwal*, Atul Dhar, “Karanja Oil Utilization in DI
Engine by Preheating: Experimental Investigations of Engine Performance,
Emissions and Combustion Characteristics, Part I”, Journal of Automobile
Engineering, Proceedings of IMechE, Part-D, Volume 224, Number 1, pp
73-84, 2010. (ISSN # 09544070).
(Link)
(33) Avinash Kumar Agarwal*, Atul Dhar, “Karanja Oil Utilization in DI
Engine by Preheating: Experimental Investigations of Engine Durability
and Lubricating Oil Properties Part II”, Journal of Automobile
Engineering, Proceedings of IMechE, Part-D, Volume 224, Number 1, pp
85-97, 2010. (ISSN # 09544070).
(Link)
(34) Shailendra Sinha, Avinash Kumar Agarwal, “Experimental Investigation
of the Effect of Biodiesel Utilization on Lubricating Oil Degradation
and Wear of a Transportation CIDI Engine”, Journal of Engineering for
Gas Turbine and Power, Transactions of ASME, Volume 132, Issue 4, April
2010. pp 8011-8019. (ISSN # 0742-4795).
(Link)
(35) Avinash Kumar Agarwal, Mritunjaya Kumar Shukla, “Portable Biogas
Bottling Plant: A Practical Approach for Using Biogas as Transportation
Fuel in Rural Areas”, International Journal of Oil, Gas and Coal
Technologies, pp 379-388, Vol. 2, No. 4, 2009. (ISSN # 1753-3309).
(Link)
(36) Anand K.A., Anisia K.S., Agarwal Avinash
Kumar, Kumar A., “Hydrogenolysis of Glycerol with FeCo Macrocyclic
Complex Bonded to Raney Nickel Support under Mild Reaction Conditions”,
Canadian Journal of Chemical Engineering, Volume 88, Issue 2, April
2010, Pages 208-216. (ISSN # 0008-4034).
(Link)
(37) Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Experimental
Investigation of Effect of Intake Air Temperature and Mixture Quality on
Combustion of Methanol and Gasoline Fuelled HCCI Engine”, Journal of
Automobile Engineering, Proceedings of IMechE, Part-D, Volume 223,
Number 11, pp 1445-1458, 2009. (ISSN # 09544070).
(Link)
(38) Avinash Kumar Agarwal, Tanu Priya Bajaj, “Chemical Kinetics of Base
Catalysed Tranesterification of Karanja Oil for Biodiesel Production”
International Journal of Oil, Gas and Coal Technologies, Vol. 2, No. 3,
2009, pp 297-310. (ISSN # 1753-3309).
(Link)
(39) Shailendra Sinha, Avinash Kumar Agarwal, “Experimental
Investigations of the Tribological Properties of Lubricating Oil from
Biodiesel Fuelled Medium Duty Transportation CIDI Engine”, SAE Paper No.
2008-01-1385, SAE Special Publication SP-2176 (ISBN #
978-0-7680-2018-2), SAE International Journal of Fuels and Lubricants,
April 2009 (1), pp 719-730. (ISSN: 1946-3952).
(Link)
(40) Rakesh Kumar Maurya, Avinash Kumar Agarwal, “Experimental
Investigation of cycle-by-cycle variations in CAI/HCCI combustion of
Gasoline and Methanol by varying different engine operating conditions”,
SAE 2009-01-1345, SAE Special Publication SP-2242, 2009. (ISBN #
978-0-7680-2138-7)
(Link)
(41) Avinash Kumar Agarwal, Atul Dhar, “Performance, Emission and
Combustion Characteristics of Jatropha Oil Blends in a Direct Injection
Engine” SAE 2009-01-0947, SAE Special Publication SP-2239, 2009. (ISBN #
978-0-7680-2135-6).
(Link)
(42) Dhananjay Kumar Srivastava, Martin Weinrotter, Kurt Iskra, Avinash
Kumar Agarwal, Ernst Wintner, ”Characterisation of Laser Ignition in
Hydrogen-Air Mixtures in a Combustion Bomb” International Journal of
Hydrogen Energy, Volume 34, Issue 5, March 2009, pp 2475-2482. (ISSN #
0360-3199).
(Link)
(43) Dhananjay Kumar Srivastava, Martin Weinrotter, Henrich Kofler,
Avinash Kumar Agarwal, Ernst Wintner, “Laser-Assisted Homogeneous
Charge Ignition in a Constant Volume Combustion Chamber”
Optics and Lasers in Engineering, Volume 47, 2009, pp 680–685. (ISSN #
0143-8166).
(Link)
(44) Atul Dhar, Vishal Saxena*, Avinash Kumar Agarwal, “Measurement of
Dynamic Lubricating Oil Film Thickness between Piston Ring and Liner in
a Motored Engine” Sensors and Actuators, Volume 149, Issue 1, January
2009, pp 7-15. (ISSN # 0924-4247).
(Link)
(45) Shailendra Sinha, Avinash Kumar Agarwal, “Ricebran Oil Biodiesel’s
Performance, Emission and Endurance Test on a CIDI Transport Engine”
International Journal of Vehicle Design, Vol. 50, Nos. 1/2/3/4, 2009, pp
248-270. (ISSN # 0143-3369).
(Link)
(46) Avinash Kumar Agarwal, K. Rajamanoharan, “Experimental
Investigations of Performance and Emissions of Karanja Oil and its
Blends in a Single Cylinder Agricultural Diesel Engine”, Applied Energy,
Vol. 86, No. 1, January 2009, pp 106-112. (ISSN # 0306-2619).
(Link)
(47) Harish Kumar Gangwar, Avinash Kumar Agarwal, “Combustion
Characteristics of Jatropha Oil Blends in a Transportation Engine”, SAE
Paper No. 2008-01-1383, SAE Special Publication SP-2176, 2008.
(Link)
(48) Bhaskar Mazumdar, Avinash Kumar Agarwal, “Performance, Emission and
Combustion Characteristics of a Waste Cooking Oil Based Biodiesel
Fuelled CIDI Engine”, SAE Paper No. 2008-01-1384, SAE Special
Publication SP-2176, 2008. (ISBN # 978-0-7680-2018-2).
(Link)
(49) Deepak Agarwal, Lokesh Kumar, Avinash Kumar Agarwal, “Performance
Evaluation of a Vegetable Oil Fuelled Compression Ignition Engine,
Renewable Energy, Vol. 33, No. 6, June 2008, pp. 1147-1156. (ISSN #
0960-1481).
(Link)
(50) Shailendra Sinha, Avinash Kumar Agarwal, Sanjeev Garg, “Biodiesel
Development from Rice bran oil: Transesterification Process Optimization
and Fuel Characterization” Energy Conversion and Management, Vol. 49,
No. 5, May 2008, pp. 1248-1257. (ISSN # 0196-8904).
(Link)
(51) Harish Kumar Gangwar, Avinash Kumar Agarwal, “Emission and
Combustion Characteristics of Vegetable Oil (Jatropha curcus) Blends in
an Indirect Ignition Transportation Engine”, International Energy
Journal, Volume 9, March 2008, pp 43-51 (Special Issue on Biofuels:
Opportunities and Technologies). (ISSN # 1513-718X).
(Link)
(52) H Ranner, P K Tiwari, H Kofler, M Lackner, E Wintner, A K Agarwal, F
Winter, "Inherent Laser Cleaning of Optical Ignition Window for
Engines", Optical Engineering, Vol. 46, No. 10, October 2007, pp 104301
(8 pages). (ISSN # 0091-3286).
(Link)
(53) Deepak Agarwal, Avinash Kumar Agarwal, “Performance and Emissions
Characteristics of Jatropha Oil (Preheated and Blends) in a Direct
Injection Compression Ignition Engine” Applied Thermal Engineering,
Volume 27, Issue 13, September 2007, Pages 2314-2323. (ISSN #
1359-4311).
(Link)
(54) Shailendra Sinha, Avinash Kumar Agarwal, “Experimental Investigation
of the Combustion Characteristics of Biodiesel (Rice Bran Oil Methyl
Ester) Fuelled Direct Injection Transportation Diesel Engine”, Journal
of Automobile Engineering, Proceedings of IMechE, Part-D, Vol. 221,
Issue 8, August 2007, pp 921-932. (ISSN # 09544070).
(Link)
(55) Avinash Kumar Agarwal, “Bio Fuels (Alcohols and Biodiesel)
Applications as fuels for Internal Combustion Engines”, Progress in
Energy and Combustion Science, Volume 33, Issue 3, June 2007, Pages
233-271. (ISSN # 0360-1285).
(Link)
(56) Avinash Kumar Agarwal, Sandeep Kumar Goyal, “Experimental and
Numerical Investigations of Jet Impingement Cooling of Piston of
Heavy-Duty Diesel Engine for Controlling the Non-Tail Pipe Emissions”,
SAE paper no 2007-01-0763, SAE Special Publication SP-2132, 2007 (ISBN #
978-0-7680-1922-3) and Transactions of SAE 2007: Journal of Passenger
Cars: Electronic and Electrical Systems (Document Number: V116-7), April
2008.
(Link)
(57) Sumit Pramanik, Avinash Kumar Agarwal, K. N. Rai, Ashish Garg,
“Development of High Strength Hydroxyapatite by Solid-State-Sintering
Process”, Ceramic International, Volume 33, Issue 3, April 2007, Pages
419-426. (ISSN # 0272-8842).
(Link)
(58) Pawan Ghildiyal, Avinash Kumar Agarwal, “Review of Commercial
Biodiesel Production Technology” ICFAI Journal of Science and
Technology, Vol. 3, No. 1, March 2007, pp 19-37. (ISSN # 0973-2268).
(Link)
(59) Avinash Kumar Agarwal, Ashish Garg, D K Srivastava, and M K Shukla,
“Experimental Wear Characterization of Titanium Based PVD Coatings for
Automotive Applications Using Exhaust Gas Recirculation”, Surface and
Coating Technology, Volume 201, Issue 13, March 2007, pp 6182-6188.
(ISSN # 0257-8972).
(Link)
(60) Dhananjay Kumar Shrivastava, Avinash Kumar Agarwal, “Effect of Liner
Surface Properties on Wear, Friction and Surface Morphology in
Non-Firing Engine Simulator”, Materials and Design, Volume 28, Issue 5,
2007, Pages 1632-1640. (ISSN # 0261-3069).
(Link)
(61) Deepak Agarwal, Shailendra Sinha, Avinash Kumar Agarwal,
“Experimental Investigation of Control of NOx Emissions in Biodiesel
Fuelled Compression Ignition Engine” Renewable Energy, Volume 31, Issue
14, Pages 2356-2369, November 2006. (ISSN # 0960-1481).
(Link)
(62) Mani Bijoy Verghese, Avinash Kumar Agarwal, “Numerical
Investigations of Piston Cooling Using Oil Jet in Heavy Duty Diesel
Engines”, Journal of Engine Research, Proceedings of IMechE, Volume 7,
Number 5, pp 411-422, 2006. (ISSN # 1468 0874).
(Link)
(63) Dipankar Dwivedi, Avinash Kumar Agarwal, Mukesh Sharma, “Particulate
Emission Characterization of a Biodiesel Vs Diesel Fuelled Compression
Ignition Transport Engine: A Comparative Study” Atmospheric Environment,
Volume 40, Issue 29, September 2006, Pages 5586-5595. (ISSN #
1352-2310).
(Link)
(64) Shrawan Kumar Singh, Dhananjay Kumar Srivastava, Avinash Kumar
Agarwal, Mukesh Sharma, “Experimental Investigation of the Effect of EGR
on Wear Performance of a Compression Ignition Engine”, Journal of
Engineering for Gas Turbine and Power, Transactions of ASME, Vol. 128,
Issue 4, pp 921-927, October 2006. (ISSN # 0742-4795).
(Link)
(65) Avinash Kumar Agarwal, Mukesh Sharma, “Furnace Design Improvements
in Indian Cottage Sugar Industry (Khandsari) for Air Pollution
prevention and Control”, Clean Air: International Journal on Energy for
a Clean Environment, Volume 7, Issue 1, pp 59-75, 2006. (ISSN #
1561-4417).
(Link)
(66) Shrawan Kumar Singh, Avinash Kumar Agarwal, Mukesh Sharma,
“Experimental Investigations into Lubricating Oil Tribology of EGR
Operated Engine”, Applied Thermal Engineering, Vol. 26, No. 2-3, pp
259-266, February 2006. (ISSN # 1359-4311).
(Link)
(67) Sumit Pramanik, Avinash Kumar Agarwal, K N Rai, “Chronology of Total
Hip Joint Replacement and Material Development”, Trends in Biomaterials
and Artificial Organs, Vol. 19, No. 1, pp 15-25, July 2005. (ISSN #
0971-1198).
(Link)
(68) Sumit Pramanik, Avinash Kumar Agarwal, K N Rai, “Development of High
Strength Hydroxyapatite for Hard Tissue Replacement”, Trends in
Biomaterials and Artificial Organs, Vol. 19, No. 1, pp 45-49, July 2005.
(ISSN # 0971-1198).
(Link)
(69) Mukesh Sharma, Avinash Kumar Agarwal, K V L Bharathi, “Characterization
of Exhaust Particulates from Diesel Engine”, Atmospheric Environment,
Vol. 39, Issue 17, pp 3023-3028, June 2005. (ISSN # 1352-2310).
(Link)
(70) Avinash Kumar Agarwal, “Lubrication Oil Tribology Of A Biodiesel-Fuelled
CI Engine” Journal of Automobile Engineering, Proceedings of IMechE,
Part-D, Volume 219, Number 5, pp 703-714, May 2005. (ISSN # 09544070).
(Link)
(71) Mani Bijoy Varghese, Sandeep Kumar Goyal, Avinash Kumar Agarwal,
“Numerical and Experimental Investigation of Oil Jet Cooled Piston’ SAE
Paper No. 2005-01-1382, SAE Special Publication SP-1945, pp 19-25, 2005.
(ISBN # 0-7680-1590-1).
(Link)
(72) Anirudh Gautam, Avinash Kumar Agarwal, “Evaluation of Steel Cap Piston
for Up-gradation of Diesel Electric Locomotives for Indian Railways” SAE
Paper No. 2005-01-1645, SAE Special Publication SP-1964, pp 43-48, 2005.
(ISBN # 0-7680-1609-6).
(Link)
(73) Shailendra Sinha, Avinash Kumar Agarwal, “Performance Evaluation of a
Biodiesel (Rice Bran Oil Methyl Ester) Fuelled Transport Diesel Engine”,
SAE Paper No. 2005-01-1730, SAE Special Publication SP-1978, pp 159-166,
2005. (ISBN # 0-7680-1623-1).
(Link)
(74) Avinash Kumar Agarwal, Mukesh Sharma and L P Tewari, “Process
Improvements in Khandsari (Cottage Sugar Industry) in India”,
International Sugar Journal, Vol. CVI, Issue 1262, February 2004, pp
94-100. (ISSN # 0020-8841).
(Link)
(75) Jayashree Bijwe, Avinash Kumar Agarwal, Atul Sharma, “Assessment of
Lubricity of Biodiesel Blends in Reciprocating Wear Mode” SAE Paper No
2004-01-3068, Transactions of SAE 2004, Journal of Fuels & Lubricants,
Section 4, pp 2117-2126, 2004. (ISBN # 0-7680-1553-7).
(Link)
(76) Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, “Experimental
Investigations on the Effect of Liner Surface Properties on Wear in
Non-Firing Engine Simulator”, SAE 2004-01-0605, SAE World Congress 2004
and SAE Special Publication SP-1820, pp 53-62, 2004. (ISBN #
0-7680-1356-9).
(Link)
(77) Avinash Kumar Agarwal, Jayashree Bijwe, L M Das “Wear Assessment In
Biodiesel Fuelled Compression Ignition Engine", Journal Of Engineering
For Gas Turbine And Power, Transactions of ASME, Volume 125, Number 3,
pp 820- 826, July 2003. (ISSN # 0742-4795).
(Link)
(78) Avinash Kumar Agarwal, Jayashree Bijwe, L M Das “Effect Of Biodiesel
Utilisation On Wear Of Vital Parts In Compression Ignition Engine”,
Journal Of Engineering For Gas Turbine And Power, Transactions of ASME,
Volume 125, Number 2, pp. 604-611, April 2003. (ISSN # 0742-4795).
(Link)
(79) Avinash Kumar Agarwal, L M Das “Biodiesel Development And
Characterization For Use As A Fuel In Compression Ignition Engine”,
Journal Of Engineering For Gas Turbine And Power, Transactions of ASME,
Volume 123, Number 2, pp 440- 447, April 2001. (ISSN # 0742-4795).
(Link)
(80) Avinash Kumar Agrawal, Shailendra Sinha, Mritunjay Kumar Shukla, Shrawan
Singh ”Effect of EGR on the Exhaust Gas Temperature and Exhaust Opacity
in an Experimental Diesel Engine”, SADHANA (Indian Academy of Science
proceedings in engineering sciences), Vol. 29, Part 3, June 2004, pp
275-284. (ISSN # 0256-2499).
(Link)
(81) Dhananjay Kumar Srivastava, Avinash Kumar Agarwal, “Experimental
Evaluation of Effect of Surface Topography Features on Wear and Friction
of Liner in a Non-Firing Engine Simulator”, Indian Journal of Tribology,
Volume 3, Number 1-2, December 2004, pp 33-37.
(Link)
(82)
G D Agarwal, Avinash Kumar Agarwal “Environmental Implications Of Using
Biomass As An Alternative Source Of Energy: A Critical Assessment”,
TIMES (TERI Information Monitor on Environmental Science), Vol. 4, No.
2, pp 79-89, December 1999. (ISSN # 0971-8192).
(Link)
(83) Avinash Kumar Agarwal, G.D. Agarwal “Recent Technologies for Conversion
of Biomass into Energy, Fuels and Useful Chemicals”, TIMES (TERI
Information Monitor on Environmental Science), Vol. 4, No. 1, pp 1-12,
June 1999. (ISSN # 0971-8192).
(Link)
(84) Avinash Kumar Agarwal “Vegetable Oil Vs. Diesel Fuel: Development and
Use of Biodiesels in a Compression Ignition Engine”, TIDE (TERI
Information Digest on Energy), Vol. 8, No. 3, pp 191 – 203, September
1998. ((ISSN # 0971-085X). (Link) |
